UPS F.904
ALKALINITY BUILDER
GENERAL DESCRIPTION :
The UPS F. 904 is a liquid boiler feed water treatment which is blends of alkalinity builders and polymeric dispersants to properly to properly condition boiler water for the prevention of corrosion and deposition. The UPS F. 904 is specially formulated to provide the proper levels of alkalinity and general dispersancy for specific treatment needs. Operating conditions and feed water quality are among the criteria used to properly select the product required.
USAGE :
Dosage requirements of UPS F. 904 depends on a number of boiler parameters and the chemical quality of the feed water. Your UPS Technical Service Representative will provide treatment recommendations after thorough chemical analyses of your make up water, feed water and a survey of your boiler conditions are made.
TYPICAL PHYSICAL PROPERTIES
Appearance…………………….…………Brownish liquid
pH (Neat)……………………………………….12.5 – 13.5
Specific Gravity (@ 25º C)…………………...…15 – 1.52
Solubility……………………………… miscible with water
REGULATORY STATUS :
The UPS F. 904 has been formulated in compliance with subpart D, section 173.310 of the FDA Food Additive Regulation for the use in boilers producing steam which contacts food. It is also authorized by the USDA for use in Federally Inspected Meat and Poultry Plants.
HANDLING AND STROGES
The UPS F. 904 is strongly alkaline. Do not transfer to aluminum or galvanized containers. This product will cause severe skin and eye irritation. Harmful if swallowed. Avoid eye and skin contact. Keep out of reach of children. Wear eye protection and rubber gloves at all times when handling
